Daylight plane

Post Reply
MikeTurnrose
Posts: 218
Joined: Thu Apr 01, 2010 9:41 am

Daylight plane

Post by MikeTurnrose »

I've only dealt with this sort of thing twice in my career. The architect told me that the daylight plane is calculated by going 10' above grade at the property line and then going 45° upward from there toward the center of the lot. Is that typical? The architect shows the daylight plane on the plans but doesn't show the 10' and 45°. He told me this verbally. This is in Palo Alto. I don't know if this is a standard for single family residential homes in other cities or not. Thanks.
LS 4722
Posts: 479
Joined: Wed Aug 15, 2007 8:42 am

Mike

Post by LS 4722 »

MikeTurnrose
Posts: 218
Joined: Thu Apr 01, 2010 9:41 am

Post by MikeTurnrose »

Thanks Paul. I didn't think Palo Alto would have such an extensive handout, but I should have checked.
LS 4722
Posts: 479
Joined: Wed Aug 15, 2007 8:42 am

Mike

Post by LS 4722 »

You are welcome.

Why would you need to know the design elements of a Daylight Plane? That's the architects job to determine, in combination with other things, a maximum building height or eave projection.

Maybe I am missing something here.
User avatar
LS_8750
Posts: 1166
Joined: Tue Jul 20, 2010 5:36 pm
Location: Sonoma
Contact:

Post by LS_8750 »

You want to make sure the architect got the daylight plane determination right. So the prudent land surveyor will confirm prior to field verifying compliance. It is a boundary setback issue.
Clark E. Stoner, PE, PLS
Bear Flag Engineering, Inc.
Sonoma County
Santa Cruz County
tel. 707.996.8449 (Sonoma) or 831.477.9215 (Santa Cruz)
clark@bearflagcivil.com
LS 4722
Posts: 479
Joined: Wed Aug 15, 2007 8:42 am

Daylight what?

Post by LS 4722 »

You want to make sure the architect got the daylight plane determination right. So the prudent land surveyor will confirm prior to field verifying compliance. It is a boundary setback issue.
No, it's a design issue in a profession that is far apart from an LS.

In the 40+ years I have been doing this I have never had to verify that an architect figured a setback/height correctly.
dmi
Posts: 981
Joined: Wed Dec 08, 2004 7:42 pm
Location: San Francisco
Contact:

noooooooooooo

Post by dmi »

It is a land planning issue. Land planning is something that land surveyors are permitted to do....
Dane Ince, LS
Certified Federal Surveyor
415-321-9300
WWW.SanFranciscoSurveyingCompany.com
User avatar
Stephen Johnson
Posts: 363
Joined: Wed Aug 05, 2009 7:48 am

Post by Stephen Johnson »

I have to agree with Dane and Clark. Whether or not you see it as a surveying issue, it would behoove you to check to make sure it is done correctly or not. This will often keep you out of problems you don't want to have.
Stephen Johnson, PLS 6303

Politicians should serve two terms. One in office and one in prison.

Stop Repeat Offenders!!! Quit ReElecting Them!!!
LS 4722
Posts: 479
Joined: Wed Aug 15, 2007 8:42 am

Stephen

Post by LS 4722 »

Stephen Johnson wrote:I have to agree with Dane and Clark. Whether or not you see it as a surveying issue, it would behoove you to check to make sure it is done correctly or not. This will often keep you out of problems you don't want to have.
You guys enjoy the added liability. This is a BS request any way it's sliced, assuming the City of Palo Alto has requested it.
Post Reply