Page 1 of 1
Trimble external battery replacement
Posted: Thu Feb 06, 2014 1:41 pm
by sako
Does anybody know of a place in CA to send these batteries (part #571204270) to be rebuilt?
Thanks
Posted: Wed Feb 19, 2014 10:32 am
by Plumb Bob
Order them here and a little bit of simple soldering and your good to go...
http://store.batteryspecialists.com/571 ... nsert.html
Posted: Wed Feb 19, 2014 10:39 am
by Jim Frame
Soldering would be the easy part. Cutting the case open and gluing it closed again would seem to be more difficult, though I've never tried it.
Posted: Thu Feb 20, 2014 4:49 pm
by land butcher
Jim Frame wrote:Soldering would be the easy part. Cutting the case open and gluing it closed again would seem to be more difficult, though I've never tried it.
That was my biggest issue with having battery pacs rebuilt. On my 2nd EDM I took the time to carefully open the cases myself and told the battery replacement people "DO NOT GLUE CLOSED" in the instructions and a tag on the battery pac. I then resealed them myself using a silicone instead of a hot glue.
batteries
Posted: Fri Feb 21, 2014 5:09 pm
by pls5528
I am not sure the type of battery you are referring to by the number, but, I have had my Trimble robotics (5600) off-board batteries recelled at "batteries plus". They took them apart and replaced the internal battery for less than 1/2 of buying a new one. You might want to check it out?
Posted: Sat Feb 22, 2014 2:46 pm
by land butcher
I used these guys for my sokkia batts.
http://store.batteryspecialists.com/
Posted: Tue Feb 25, 2014 8:18 pm
by sako
Thanks guys. I had my 4 batteries recelled from ciscokidz.com for $306 total. No tax, no Shipping.
Posted: Sun Feb 01, 2015 2:56 pm
by sako
For those of you guys with Trimble 5600, what was your experience with recelling the 2' power stick (571126309)?
Re:
Posted: Mon Feb 08, 2016 1:24 pm
by sako
sako wrote:Thanks guys. I had my 4 batteries recelled from ciscokidz.com for $306 total. No tax, no Shipping.
The battery housing opened one after other because these guys used cheap glue, very disappointed.