Easement Description
-
VANCE
- Posts: 197
- Joined: Wed Jun 18, 2008 2:01 pm
- Location: redwood valley
Easement Description
I got comments back and I wanted to see what you all thought of them. I prefer my description over the red lines, but I wanted to get another opinion.
I do not like to use the word "contiguous" because of the different meanings.
Thanks in advance
Vance
I do not like to use the word "contiguous" because of the different meanings.
Thanks in advance
Vance
You do not have the required permissions to view the files attached to this post.
- pls7809
- Posts: 1035
- Joined: Tue Apr 13, 2004 3:48 pm
- Location: Chino, CA
I tend not to say what the description is for in the actual discription, so I would agree with the marks that remove the reference to utility easement. I usually leave the type of document it is to be determined in the first page legal stuff.
For myself, I would say that first sentance after the preamble like this...
A 10.00-foot wide strip of land, the southerly and southeasterly line of said strip being described as follows:
The sideline statement would be (for me)...
The northerly and northwesterly line of said strip shall be prolonged...etc.
For myself, I would say that first sentance after the preamble like this...
A 10.00-foot wide strip of land, the southerly and southeasterly line of said strip being described as follows:
The sideline statement would be (for me)...
The northerly and northwesterly line of said strip shall be prolonged...etc.
Ryan Versteeg, PLS, CFedS
- pls7809
- Posts: 1035
- Joined: Tue Apr 13, 2004 3:48 pm
- Location: Chino, CA
I do not use that word. I would definitely not use that word in your legal.
From Definitions of Surveying and Associated Terms - ACSM/ASCE 1978
Varies in meaning from close in proximity to near, though not in contact to, touching, or bounded, or traversed by.
From Blacks Law Dictionary
1. Touching at a point or along a boundary; ADJOINING
2. Near in time or sequence; successive
From Definitions of Surveying and Associated Terms - ACSM/ASCE 1978
Varies in meaning from close in proximity to near, though not in contact to, touching, or bounded, or traversed by.
From Blacks Law Dictionary
1. Touching at a point or along a boundary; ADJOINING
2. Near in time or sequence; successive
Ryan Versteeg, PLS, CFedS
-
Dave Sigman
- Posts: 31
- Joined: Fri Jul 22, 2011 10:32 am
- Location: Sacramento
Legal Description
We use "adjacent to and contiguous with" in our SMUD right of way descriptions. Not something I came up with but something SMUD has used for the last 60+ years.
One small comment: I wouldn't refer to the corner and the 1/2" iron pipe as being one and the same. I'd say "Beginning ath the most easterly corner of said lands, said corner being marked by a 1/2" iron pipe"
We do a lot of right of way and easement descriptions at SMUD and in this case we would say: "A strip of land 10.00 feet in width, the southerly and southwesterly line of which is described as follows:" It avoids the adjacent to and contiguous with confusion.
For what it's worth, SMUD has never used the statement concerning lengthening and shortening the sidelines. The thinking here is that it's implied.
One small comment: I wouldn't refer to the corner and the 1/2" iron pipe as being one and the same. I'd say "Beginning ath the most easterly corner of said lands, said corner being marked by a 1/2" iron pipe"
We do a lot of right of way and easement descriptions at SMUD and in this case we would say: "A strip of land 10.00 feet in width, the southerly and southwesterly line of which is described as follows:" It avoids the adjacent to and contiguous with confusion.
For what it's worth, SMUD has never used the statement concerning lengthening and shortening the sidelines. The thinking here is that it's implied.
Dave Sigman
LS 8319
LS 8319
- Lee Hixson
- Posts: 577
- Joined: Fri Jul 02, 2004 8:03 am
- Location: Yuba City, CA
- Contact:
-
E_Page
- Posts: 2144
- Joined: Thu Jun 23, 2005 6:49 am
- Location: El Dorado County
If it's an either/or decision, I'd go with the redmarks. The "uniform width" language takes out any ambiguity of interpreting whether the 10.00 feet is measured perpendicular to the described lines. If the line is parllel with, then the strip is going to be contiguous, either way is fine.
You are describing a strip of land which will be used as an easement, so I tend to go with "strip".
But most of all, neither is terribly wrong and if this requires approval from whoever is doing the review, just go with it so as not to hold up your client's project.
You are describing a strip of land which will be used as an easement, so I tend to go with "strip".
But most of all, neither is terribly wrong and if this requires approval from whoever is doing the review, just go with it so as not to hold up your client's project.
Evan Page, PLS
A Visiting Forum Essayist
A Visiting Forum Essayist