Monument Photo

pls7809 · Post by **pls7809** » Mon Apr 28, 2014 6:53 am

The crew sent this one in from a job from last week. Pretty elaborate markings on the cap.

bruce hall · Post by **bruce hall** » Mon Apr 28, 2014 8:14 am

what is the diameter of the cap or disc?

Ric7308 · Post by **Ric7308** » Mon Apr 28, 2014 9:13 am

Ryan, I found quite a few of FFF's monuments in and around Santa Barbara County. Most of the time, surveyors are excited to find his monuments because they pretty much land where he said he put them. Those casts are pretty remarkable for the time period when you think about what it took to manufacturer those caps / pipes then. FFF was very active in the SB and Ventura areas especially prior to Ventura County being split off.

Ric

PS: While recently perusing Board minutes from the late 1930's, I found one meeting where FFF filed a complaint against another surveyor for improper section breakdown. He provided a very detailed testimony during the meeting.

pls7809 · Post by **pls7809** » Mon Apr 28, 2014 10:08 am

I've never seen anything like it. Our crew's notes say 2" in diameter.

Dave Karoly, PLS · Post by **Dave Karoly, PLS** » Mon Apr 28, 2014 10:52 am

Paul Cook posted photos of monument caps like that on Facebook.

Seems like they were roughly that time period.

Berk Blake, PLS CA · Post by **Berk Blake, PLS CA** » Mon Apr 28, 2014 11:42 am

Cap is a screw on cap and it should be 3-1/2" diameter. The pipe is 2" I.D. and usually 30" long with a 1/2" I.d. pipe set through the bottom couple of inches perpendicular to the monument pipe. Definitely a monument that was dug into the ground, not driven

pls7809 · Post by **pls7809** » Mon Apr 28, 2014 12:09 pm

It's kind of nice when the cap tells you exactly what the monument represents.

pls7809 · Post by **pls7809** » Mon Apr 28, 2014 12:10 pm

Maybe that's what the crew meant on their notes. 3.5" cap in 2" IP.

land butcher · Post by **land butcher** » Mon Apr 28, 2014 4:44 pm

The prettiest one I ever saw was MV2. Mission Viejo ranch corner #2. Brass ~2x3in rectangle with the MV in script. Was in the middle of Camino Capsitrano rd s/o of Junipero Serra Rd.

7702 · Post by **7702** » Tue Apr 29, 2014 6:52 am

A bonus "capture" in the attempted photo of a bent ACOE levee monument from a couple of months ago.

Lee Hixson · Post by **Lee Hixson** » Tue Apr 29, 2014 7:23 am

Excellent, "capture!"

David Anaya · Post by **David Anaya** » Wed Apr 30, 2014 8:40 pm

Yup seen some in Montecito. the wow factor was off the charts when i found them. Its like finding Gold.

Matt Cunningham · Post by **Matt Cunningham** » Wed May 07, 2014 8:46 am

I've had similar experience following FFF's work , as others have stated. Picture attached is of the man himself...

Ric7308 · Post by **Ric7308** » Wed May 07, 2014 10:16 am

And that's the tool he used to set those big pipes!

California Surveyors Forums

Monument Photo

Monument Photo

boy that is pretty, just like you said.

monument photo

Witness to monument?