I'm teaching Engineering Surveying for the ASCE Chapter in Sacramento again.
Just recently, I saw a two sheet "cheat sheet" of triangle formulae that were written in a circle around a triangle.
I thought I saw them on this site as an attachment. I could have sworn it was an attachment from Paul Plutae.
Does anyone know what I'm talking about and can anyone point me to the sheets or send them to me, please.
Thanks in advance!
Triangle Formula Cheat Sheet
- Ian Wilson
- Posts: 1087
- Joined: Sat Aug 03, 2002 6:58 am
- Location: Bay Area
Triangle Formula Cheat Sheet
Ian Wilson, P.L.S. (CA / NV / CO)
Alameda County Surveyor
Alameda County Surveyor
- Ian Wilson
- Posts: 1087
- Joined: Sat Aug 03, 2002 6:58 am
- Location: Bay Area
- Ian Wilson
- Posts: 1087
- Joined: Sat Aug 03, 2002 6:58 am
- Location: Bay Area
- PLS7393
- Posts: 949
- Joined: Tue Aug 24, 2004 2:09 pm
- Location: Bay Area (Fremont)
- Contact:
- land butcher
- Posts: 1615
- Joined: Fri Jul 26, 2002 7:26 pm
- Location: calif
- LS_8750
- Posts: 1166
- Joined: Tue Jul 20, 2010 5:36 pm
- Location: Sonoma
- Contact:
Cute. Never seen it before.
Devised by Ivy League scared c average trig student in the 1930s likely, that discovered a way to make a buck.
Too many formulas will spoil a clear thought process. I've never encountered a reason to remember any of that stuff. COGO (when you know the definition) trumps all silly trig and geometry. Well, at least when you've mastered geo and trig. Y = mx +b trumps trig every time. Of course, only when you know the facts.
Devised by Ivy League scared c average trig student in the 1930s likely, that discovered a way to make a buck.
Too many formulas will spoil a clear thought process. I've never encountered a reason to remember any of that stuff. COGO (when you know the definition) trumps all silly trig and geometry. Well, at least when you've mastered geo and trig. Y = mx +b trumps trig every time. Of course, only when you know the facts.
Clark E. Stoner, PE, PLS
Bear Flag Engineering, Inc.
Sonoma County
Santa Cruz County
tel. 707.996.8449 (Sonoma) or 831.477.9215 (Santa Cruz)
clark@bearflagcivil.com
Bear Flag Engineering, Inc.
Sonoma County
Santa Cruz County
tel. 707.996.8449 (Sonoma) or 831.477.9215 (Santa Cruz)
clark@bearflagcivil.com
-
bruce hall
- Posts: 645
- Joined: Sun Oct 05, 2003 9:18 pm
- Location: huntington beach, orange county, california
Well I always
thought that the sine of half delta multiplied by twice the radius was a slick formula to get the chord.
Another one was decimal degrees multiplied by the radius multiplied by 0.01745329 to get the arc length.
Not sure about Y
Another one was decimal degrees multiplied by the radius multiplied by 0.01745329 to get the arc length.
Not sure about Y
Bruce Hall Land Surveyor No. 4743
5732 Middlecoff Drive
Huntington Beach, Ca. 92649
714 840 4380
5732 Middlecoff Drive
Huntington Beach, Ca. 92649
714 840 4380
- Dave Karoly, PLS
- Posts: 670
- Joined: Fri Aug 30, 2002 6:26 pm
- Location: Sacramento
-
Dave Lindell
- Posts: 298
- Joined: Tue Dec 10, 2002 9:17 pm
- Location: Rancho Mirage
Cheat sheet formulae
The trick is...can you derive them?