Lead & Tags

User avatar
Jim Frame
Posts: 1599
Joined: Thu Oct 17, 2002 8:52 pm
Location: Davis, CA
Contact:

Re: Lead & Tags

Post by Jim Frame »

One swipe with a square-point shovel and there'll be no need to wait for corrosion to finish the job.
User avatar
Peter Ehlert
Posts: 717
Joined: Sun Oct 26, 2003 2:40 pm
Location: N31°43', W116°39'
Contact:

Re: Lead & Tags

Post by Peter Ehlert »

Jim Frame wrote:One swipe with a square-point shovel and there'll be no need to wait for corrosion to finish the job.
very true... far from durable regardless the fasteners
Peter Ehlert PLS 5116 (retired)
Edward M Reading
Posts: 268
Joined: Tue Sep 15, 2015 7:23 am
Location: San Luis Obispo

Re: Lead & Tags

Post by Edward M Reading »

Boom. Done.

Image
Edward M. Reading, PLS (ID, WY, CA)
San Luis Obispo
DWoolley
Posts: 1074
Joined: Tue Aug 01, 2006 3:21 pm
Location: Orange County
Contact:

Re: Lead & Tags

Post by DWoolley »

Here's where the rubber meets the road. Figuratively, we can agree a Twinkie is likely to have a longer shelf life than a cup tack. Is setting a cup tack as a monument negligence? Negligence is defined as a failure to meet the standard of care.

Anyone willing to lay odds or take bets on what BPELSG staff would do with a complaint for the same?

DWoolley
User avatar
Mr. Smith
Posts: 225
Joined: Fri Oct 04, 2013 6:44 am
Location: Montague CA
Contact:

Re: Lead & Tags

Post by Mr. Smith »

But the lead in the hole continueth forever
btaylor
Posts: 501
Joined: Wed Jul 24, 2002 4:33 pm
Location: Foster City, CA

Re: Lead & Tags

Post by btaylor »

Edward M Reading wrote:Boom. Done.

Image
I use these as well. Out here I do not worry about countersinking but you can buy their bit and countersink those in areas where people are concerned about them being bladed out
Anthony Maffia
Posts: 530
Joined: Mon Jan 13, 2003 4:52 pm
Location: Contra Costa County, CA

Re: Lead & Tags

Post by Anthony Maffia »

Or concerned about it being a tripping hazard in a sidewalk.

BTW, a deceased surveyor in Oakland, a friend of mine, used to set his random traverse points at very conspicuous locations in sidewalks near intersections. He'd countersink a nail & washer down 3/8" or so from the concrete surface. What was COOL was that the washers had his name & telephone number, then he filled the hole with epoxy so they were like little business cards. Anyone looking for a surveyor would see them and call.
User avatar
Tom Herrin
Posts: 131
Joined: Thu Jul 10, 2008 10:06 am
Location: Highland, CA
Contact:

Re: Lead & Tags

Post by Tom Herrin »

Regarding durable nails, we have been using bronze ring shank nails, sourced from boat building suppliers, for most all cases where tags are being set. Seem to be holding up well over time. Took a while to find these after one of our local surveying suppliers stopped carrying a similar item.

https://www.jamestowndistributors.com/u ... Ring+Nails
Tom Herrin
County Surveyor
County of San Bernardino
User avatar
Peter Ehlert
Posts: 717
Joined: Sun Oct 26, 2003 2:40 pm
Location: N31°43', W116°39'
Contact:

Re: Lead & Tags

Post by Peter Ehlert »

Tom Herrin wrote:Regarding durable nails, we have been using bronze ring shank nails, sourced from boat building suppliers, for most all cases where tags are being set. Seem to be holding up well over time. Took a while to find these after one of our local surveying suppliers stopped carrying a similar item.

https://www.jamestowndistributors.com/u ... Ring+Nails
great idea!
here is a West Coast supplier, with many retail stores (shop local) WestMarine
https://www.westmarine.com/buy/fasco-fa ... 90_002_016
Peter Ehlert PLS 5116 (retired)
Post Reply