Lead & Tags
- Jim Frame
- Posts: 1599
- Joined: Thu Oct 17, 2002 8:52 pm
- Location: Davis, CA
- Contact:
Re: Lead & Tags
One swipe with a square-point shovel and there'll be no need to wait for corrosion to finish the job.
- Peter Ehlert
- Posts: 717
- Joined: Sun Oct 26, 2003 2:40 pm
- Location: N31°43', W116°39'
- Contact:
Re: Lead & Tags
very true... far from durable regardless the fastenersJim Frame wrote:One swipe with a square-point shovel and there'll be no need to wait for corrosion to finish the job.
Peter Ehlert PLS 5116 (retired)
-
Edward M Reading
- Posts: 268
- Joined: Tue Sep 15, 2015 7:23 am
- Location: San Luis Obispo
-
DWoolley
- Posts: 1074
- Joined: Tue Aug 01, 2006 3:21 pm
- Location: Orange County
- Contact:
Re: Lead & Tags
Here's where the rubber meets the road. Figuratively, we can agree a Twinkie is likely to have a longer shelf life than a cup tack. Is setting a cup tack as a monument negligence? Negligence is defined as a failure to meet the standard of care.
Anyone willing to lay odds or take bets on what BPELSG staff would do with a complaint for the same?
DWoolley
Anyone willing to lay odds or take bets on what BPELSG staff would do with a complaint for the same?
DWoolley
- Mr. Smith
- Posts: 225
- Joined: Fri Oct 04, 2013 6:44 am
- Location: Montague CA
- Contact:
Re: Lead & Tags
But the lead in the hole continueth forever
-
btaylor
- Posts: 501
- Joined: Wed Jul 24, 2002 4:33 pm
- Location: Foster City, CA
Re: Lead & Tags
I use these as well. Out here I do not worry about countersinking but you can buy their bit and countersink those in areas where people are concerned about them being bladed outEdward M Reading wrote:Boom. Done.
-
Anthony Maffia
- Posts: 530
- Joined: Mon Jan 13, 2003 4:52 pm
- Location: Contra Costa County, CA
Re: Lead & Tags
Or concerned about it being a tripping hazard in a sidewalk.
BTW, a deceased surveyor in Oakland, a friend of mine, used to set his random traverse points at very conspicuous locations in sidewalks near intersections. He'd countersink a nail & washer down 3/8" or so from the concrete surface. What was COOL was that the washers had his name & telephone number, then he filled the hole with epoxy so they were like little business cards. Anyone looking for a surveyor would see them and call.
BTW, a deceased surveyor in Oakland, a friend of mine, used to set his random traverse points at very conspicuous locations in sidewalks near intersections. He'd countersink a nail & washer down 3/8" or so from the concrete surface. What was COOL was that the washers had his name & telephone number, then he filled the hole with epoxy so they were like little business cards. Anyone looking for a surveyor would see them and call.
- Tom Herrin
- Posts: 131
- Joined: Thu Jul 10, 2008 10:06 am
- Location: Highland, CA
- Contact:
Re: Lead & Tags
Regarding durable nails, we have been using bronze ring shank nails, sourced from boat building suppliers, for most all cases where tags are being set. Seem to be holding up well over time. Took a while to find these after one of our local surveying suppliers stopped carrying a similar item.
https://www.jamestowndistributors.com/u ... Ring+Nails
https://www.jamestowndistributors.com/u ... Ring+Nails
Tom Herrin
County Surveyor
County of San Bernardino
County Surveyor
County of San Bernardino
- Peter Ehlert
- Posts: 717
- Joined: Sun Oct 26, 2003 2:40 pm
- Location: N31°43', W116°39'
- Contact:
Re: Lead & Tags
great idea!Tom Herrin wrote:Regarding durable nails, we have been using bronze ring shank nails, sourced from boat building suppliers, for most all cases where tags are being set. Seem to be holding up well over time. Took a while to find these after one of our local surveying suppliers stopped carrying a similar item.
https://www.jamestowndistributors.com/u ... Ring+Nails
here is a West Coast supplier, with many retail stores (shop local) WestMarine
https://www.westmarine.com/buy/fasco-fa ... 90_002_016
Peter Ehlert PLS 5116 (retired)